A coffee cup is a container that coffee and espresso-based drinks are served in. Coffee cups are typically made of glazed ceramic, and have a single handle for portability while the beverage is hot. Ceramic construction allows a beverage to be drunk while hot, providing insulation to the beverage, and quickly washed with cold water without fear of breakage, compared to typical glassware.
A coffee cup may also be a disposable cup in which hot beverages, including coffee, can be contained. Disposable coffee cups may be made out of paper or styrofoam. At coffee shops, paper cups are commonly used to give beverages to customers on the go, usually with a coffee cup sleeve to provide insulation against heat transferred through the container.
Video Coffee cup
History
In the past, other materials which have been used to make coffee cups are clay, wood, strengthened glass, metal, ceramic and porcelain.
Coffee cup lids
Usually made of plastic, the first patent for a coffee cup lid design was filed in 1967, and focused on creating a tight seal between the cup and the lid to reduce leaking and a vent hole to allow steam to escape. However, there was no opening for drinking, and the consumer would have to tear into the lid. In 1986, the Solo Traveler lid was created; it is found in the Museum of Modern Art's 2004 exhibit "Humble Masterpieces". Recent lid designs like the Viora have improved on Solo Traveler's design, which has too small a vent to allow sufficient air to enter while drinking. Louise Harpman, co-owner (with Scott Specht) of the world's largest collection of coffee cup lids, suggests that coffee cup lids "represent a major shift in American 'to-go' culture".
Maps Coffee cup
Shapes and sizes
Cafe drinkware
There are cafe cups in various sizes, standardised to reflect paper cup sizes. They are typically 225, 336, 460 and sometimes 570 ml. Slight variation is to be expected from coffeehouse to coffeehouse, but these sizes are the standard. These are the cups that house mochas, lattes, and other coffee drinks. These cups are also made of porcelain and shaped to encourage and aid in creating latte art.
Cappuccino
The cappuccino is served in its own cup, a 171 ml porcelain cup served on an accompanying saucer. The size of the cup reflects the traditional cappuccino, a drink with a 1:1:1 ratio. 57 ml espresso, 57 ml steamed milk, 57 ml integrated foam.
Demitasse
The Demitasse is a cup specially crafted for espresso. It is 60-80 ml in capacity, and usually served on a saucer. The traditional macchiato: 2 shots of espresso and a dollop of foam is also served in the demitasse, on an accompanying saucer.
Gibraltar or cortado
The "Gibraltar" or cortado is served in a 115 ml rocks glass.
Shape innovation
NASA designed "Space Cups" for use by astronauts in the International Space Station. The specially-shaped coffee cups, which are 3D printed, can be used to replace the old method of drinking liquids in space by sucking them out of a bag. The sharp inner corner of the Space Cup allows the liquid to flow toward the drinker's lips through capillary flow. The data from experiments conducted with Space Cups can be used to better the design of fluid systems used in space, such as toilets, oxygen, air conditioning, and water coolants. The data can also be applied to societal uses of fluid systems on Earth, such as improving the design of portable medical blood testers for infectious diseases.
Materials
Porcelain
Porcelain allows for heat retention and crema preservation. However, porcelain cools down quickly due to air bubbles in the cup. Crema is the coffee foam at the top of a shot of espresso. Preserving it in cups allows for latte art to occur in milk based espresso drinks.
Paper
Paper cups may be lined with wax or plastic to prevent leakage. The Anthora paper cup designed by Leslie Buck for the Sherri Cup Company in 1963 is recognized as an iconic part of New York City daily life. Unfortunately, the plastic-lined cups, although accepted by a few composting facilities, produce plastic fragments and contaminate the ecosystems where they are processed. Once the plastic contaminates the environment, it has not shown to biodegrade, and after a lot of accumulation it will be nearly impossible to clean up.
Polystyrene
Polystyrene, better known under the trademarked brand name Styrofoam, is used mostly because of its insulating abilities. The use of polystyrene is controversial in coffee cups and other containers because it is non-biodegradable, a major part of marine litter, difficult to recycle, and has various health risks. It is banned as a food and drink container in several U.S. cities including Portland, Ore.; San Francisco, Calif.; and Amherst, Mass. Many more cities are proposing banning the cups. The doughnut company and coffeehouse chain, Dunkin' Donuts, has been criticized for continuing to use styrofoam cups. The company has argued that there is no other material that is as insulated, and has an official statement about their foam cups on their website. However, they have begun phasing in doubled-walled paper cups designed to look like their signature foam cup.
Coffee cup sleeve
Coffee cup sleeves are roughly cylindrical sleeves that fit tightly over handle-less paper coffee cups to insulate the drinker's hands from hot coffee. The coffee sleeve was invented and patented by Jay Sorensen in 1993 and are now commonly utilized by coffee houses and other vendors that sell hot beverages dispensed in disposable paper cups. Coffee sleeves are typically made of textured paperboard, but can be found made of other materials.
References
Source of the article : Wikipedia
0 Comments